UC2856DWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Base Part Number | UC2856 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 13.1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Control Features | Enable, Frequency Control, Soft Start |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 40 ns |
| Nominal Input Voltage | 40V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 47% |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2856DWG4 Overview
The switching controller fits in the 16-SOIC (0.295, 7.50mm Width) package and is ideal for most applications. 2 outputs can be generated with the dc motor controller. Packaging for the pmic consists of Tube solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. A 7V~40V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with -40°C~85°C TA. It can switch at 200kHz. The Surface Mount value makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the DUAL position. 16 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. UC2856 can be searched for other relevant dc to dc converter ics. There are 16 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 13.1V. You should note that the dc dc regulator's usual output current is 200mA. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. 1MHz is the frequency of the switching controller. You can set the input voltage to 40V for nominal working status. There must be a voltage supply of 15V volts.
UC2856DWG4 Features
Transistor Driver Outputs
Switching Frequency: 200kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UC2856DWG4 Applications
There are a lot of Texas Instruments UC2856DWG4 DC to DC converter applications.
- Telecommunications equipment
- Computer rooms
- PSRR circuits
- Hydro power
- Overvoltage protection circuits in TV sets
- Post equipment
- Communication system
- Industrial robots
- Surface processing equipment
- Adjustable voltage or current linear circuits
