UC2861DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 450kHz |
| Base Part Number | UC2861 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 1.7V |
| Max Output Current | 500mA |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10.5V~22V |
| Control Features | Soft Start |
| Max Output Voltage | 5V |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 10kHz~1MHz |
| Max Input Voltage | 20V |
| Control Technique | RESONANT CONTROL |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Internal Switch(s) | Yes |
| Max Duty Cycle | 50 % |
| Duty Cycle | 100 % |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 16.5V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2861DW Overview
The ac to dc converter is embedded in 16-SOIC (0.295, 7.50mm Width) package.It is available in Tube AC/DC power converter.Surface Mount is mounted in the way of this AC/DC converter.This ac dc converter should be operated at a temperature of -25°C~85°C TA °C so that it can deliver its performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.There is 10kHz~1MHz switching frequency.Supply voltage (Vcc/Vdd) does not need to exceed 10.5V~22V .There are a total of 16 terminations in it.A ac/dc converter with 16 pins is available.There are 16 pins on the ac-dc converter.It is possible to search for similar acdc converters by using the UC2861 family.The number of outputs to run is 2 .The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter is set to 200mA for the output current.There is 1.7V voltage output from it.A high efficiency is achieved when operating at a frequency of 450kHz .It is possible to read the REACH SVHC standard at: No SVHC .It is available to power the AC to DC converter input voltage under 20V .Ensure that this AC to DC converter is always set to 12V .
UC2861DW Features
Packaged with 16-SOIC (0.295, 7.50mm Width)
Switching Frequency at 10kHz~1MHz
With 16 pins
Output Current at 200mA
UC2861DW Applications
There are a lot of Texas Instruments UC2861DW AC DC Converters applications.
- Low power ac?dc Adapters for Chargers
- Battery Chargers
- Auxiliary Power Supplies
- PDAs
- Universal Off-Line Power Supplies
- Tablets
- Switching AC-DC Charger
- AC--DC Adapter
- Standby and Auxiliary Power Supplies
- Adapters for Handheld Electronics
