UC2863N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Frequency | 450kHz |
| Base Part Number | UC2863 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 1.7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7V~22V |
| Control Features | Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 50kHz~500kHz |
| Control Technique | RESONANT CONTROL |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 100% |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UC2863N Overview
The switching controller fits in the 16-DIP (0.300, 7.62mm) package and is ideal for most applications. For outputs of 2, this dc motor controller is suitable. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). A 7V~22V voltage is supplied to the dc control and used for operating it. A -40°C~85°C TA dc switcher is not a problem. Using this switching controller, it is possible to switch at 50kHz~500kHz. dc dc regulators can be carried out with Through Hole. Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of terminations with 16 of dc switching. This dc dc converter ic uses a variety of control techniques, including RESONANT CONTROL. It is inputted with a DC switcher's voltage of 12V. Searching "UC2863" will return other relevant dc to dc converter ics. Switching converter has a total of 16 pins. Switching converter is a special type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 8V. According to the test statistics, DC regulator outputs 1.7V voltage. You should note down the dc dc regulator's usual output current of 200mA when you start a project. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. Switching controller operates at 450kHz Hz.
UC2863N Features
Transistor Driver Outputs
Switching Frequency: 50kHz~500kHz
Soft Start
RESONANT CONTROL
Max Duty Cycle: 50 %
Frequency: 450kHz
UC2863N Applications
There are a lot of Texas Instruments UC2863N DC to DC converter applications.
- Bending machines
- Direct power supply system
- Magnetohydrodynamic power
- Printing equipment
- CMM
- Handheld GPS
- Injection molding machinery
- Arc suppression circuits
- Automatic testing equipment
- Milling machines
