UC2875DWPG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 792.000628mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 1MHz |
| Base Part Number | UC2875 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Voltage | 1.7V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Control Technique | RESONANT CONTROL |
| Supply Current-Max (Isup) | 30mA |
| Nominal Input Voltage | 20V |
| Switcher Configuration | PHASE-SHIFT |
| Fault Protection | Current Limiting |
| Duty Cycle | 100% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 10.75V |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2875DWPG4 Overview
In the package 28-SOIC (0.295, 7.50mm Width) , the ac to dc converter is embedded.In Tube case, the ac dc converter is available.In this case, the AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -25°C~85°C TA °C.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.It can be used within the range of 9.5V~20V supply voltage (Vcc/Vdd).As a result, it has had 28 terminations.In this ac/dc converter, there are 28 pins.The pins of the ac-dc converter count up to 28 .Surface Mount is a suitable mounting point for the ac dc converters.It is possible to search for similar acdc converters by using the UC2875 family.A total of 4 outputs are to be processed.AC to DC converter is contained in Switching Regulator or Controllers .We are setting the output current to 500mA .In this AC to DC transformer, the output voltage is 1.7V .High efficiency can be achieved when AC to DC converters frequency is set to 1MHz .You can read the standard for REACH SVHC at: No SVHC .As a result of using this ACDC converter, CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE can also be detected.Remember that this AC to DC converter should be set to 12V at all times.
UC2875DWPG4 Features
Packaged with 28-SOIC (0.295, 7.50mm Width)
With 28 pins
Output Current at 500mA
UC2875DWPG4 Applications
There are a lot of Texas Instruments UC2875DWPG4 AC DC Converters applications.
- Portable audio
- SMPS house keeping power supplies
- Adapter/Charger for Cordless Phones
- White goods
- Utility meters
- AC/DC Adaptors/Chargers for Cordless Phone
- Automotive Telematics
- Switching AC-DC Charger
- Wall switches
- Low-Voltage I/O System Power
