banner_page

UC2875DWPTR

28 Terminations9.5V~20V 28 Pin UC2875 AC to DC power converter4 Outputs


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-UC2875DWPTR
  • Package: 28-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 456
  • Description: 28 Terminations9.5V~20V 28 Pin UC2875 AC to DC power converter4 Outputs(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-SOIC (0.295, 7.50mm Width)
Number of Pins 28
Weight 792.000628mg
Operating Temperature -25°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 28
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE
Subcategory Switching Regulator or Controllers
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 12V
Terminal Pitch 1.27mm
Frequency 1MHz
Base Part Number UC2875
Pin Count 28
Number of Outputs 4
Output Voltage 1.7V
Input Voltage-Nom 12V
Analog IC - Other Type SWITCHING CONTROLLER
Output Current 500mA
Voltage - Supply (Vcc/Vdd) 9.5V~20V
Control Features Frequency Control, Soft Start, Sync
Topology Full-Bridge
Control Mode VOLTAGE-MODE
Control Technique RESONANT CONTROL
Supply Current-Max (Isup) 30mA
Nominal Input Voltage 20V
Switcher Configuration PHASE-SHIFT
Fault Protection Current Limiting
Duty Cycle 100%
Output Isolation Non-Isolated
Voltage - Start Up 10.75V
Height 2.65mm
Length 17.9mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

UC2875DWPTR Overview


This ac to dc converter is embedded in package 28-SOIC (0.295, 7.50mm Width) .The AC/DC power converter is available in Tape & Reel (TR) .It is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -25°C~85°C TA °C.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.Within the range of 9.5V~20V supply voltage (Vcc/Vdd), it can be used.It has a total of 28 terminations.The ac/dc converter has a total of 28 pins.There are a total of 28 pins on the ac-dc converter.The ac dc converters are suitable to mount by Surface Mount .The UC2875 family can be used to search for similar acdc converters.There are 4 outputs to run.AC to DC converter is contained in Switching Regulator or Controllers .Current output is set to 500mA .This AC/DC converter produces a voltage of 1.7V as its output.This power AC DC is capable of reaching high efficiency when operating at a frequency of 1MHz .Also, CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE can be found using this ACDC converter.Keep in mind that this AC to DC converter should always be set to 12V .

UC2875DWPTR Features


Packaged with 28-SOIC (0.295, 7.50mm Width)
With 28 pins
Output Current at 500mA

UC2875DWPTR Applications


There are a lot of Texas Instruments UC2875DWPTR AC DC Converters applications.

  • Industrial controls
  • Small off-line low voltage power supplies
  • AC?DC USB chargers for Tablets
  • AC--DC Adapter
  • Battery chargers for cellular phones
  • Power adapters for network devices
  • Standby power supplies for VCR
  • Portable audio
  • Wireless System
  • Low power ac?dc Adapters for Chargers

Write a review

Note: HTML is not translated!
    Bad           Good