UC2875DWPTRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 792.000628mg |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 1MHz |
| Base Part Number | UC2875 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Voltage | 1.7V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Control Technique | RESONANT CONTROL |
| Nominal Input Voltage | 20V |
| Switcher Configuration | PHASE-SHIFT |
| Fault Protection | Current Limiting |
| Duty Cycle | 100% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 10.75V |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2875DWPTRG4 Overview
In the 28-SOIC (0.295, 7.50mm Width) package, the ac to dc converter is embedded.Tape & Reel (TR) case is available for the ac dc converter.Surface Mount mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -25°C~85°C TA in order to ensure its performance.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.The voltage range of the supply can be set to 9.5V~20V (Vcc/Vdd).There are a total of 28 terminations in it.The ac/dc converter has 28 pins.There are 28 pins in total.The ac dc converters are suitable to mount by Surface Mount .A similar acdc converter can be searched by using the UC2875 family.The number of outputs to run is 4 .The ac to dc conversions are contained in Switching Regulator or Controllers .Currently, the output current is set to 500mA .There is 1.7V voltage output from it.AC to DC converter is able to reach high efficiency when its frequency is 1MHz .Using this ACDC converter, CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE is also accessible.
UC2875DWPTRG4 Features
Packaged with 28-SOIC (0.295, 7.50mm Width)
With 28 pins
Output Current at 500mA
UC2875DWPTRG4 Applications
There are a lot of Texas Instruments UC2875DWPTRG4 AC DC Converters applications.
- Laptops
- Power tools
- Utility meters
- Adapters
- Small off-line low voltage power supplies
- ZigBee
- Power adapters for monitors
- USB type-c v1.2 chargers with optional VDM
- Battery chargers for mobile devices with touchpad display
- Shaver Charger
