UC2875N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.259996g |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UC2875 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Voltage | 1.7V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Control Technique | RESONANT CONTROL |
| Nominal Input Voltage | 20V |
| Switcher Configuration | PHASE-SHIFT |
| Fault Protection | Current Limiting |
| Input Current | 30mA |
| Duty Cycle | 100% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 10.75V |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2875N Overview
It is embedded in package 20-DIP (0.300, 7.62mm) .There is a AC/DC power converter of Tube available.It is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -25°C~85°C TA °C so that it can deliver its performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.As long as the supply voltage (Vcc/Vdd) is within the range of 9.5V~20V , the AC/DC converter may be used.A total of 20 terminations have been recorded.The ac/dc converter has 20 pins.In this ac-dc converter, there are 20 pins.Suitable mounting is provided by Through Hole .Similar acdc converters can be found using the UC2875 family.AC to DC converter is necessary to run 4 outputs.AC to DC converter is included in Switching Regulator or Controllers .It has been set to 2A for the output current.The voltage output by this AC/DC converter is 1.7V .The power AC DC is capable of high efficiency when operated at a frequency of 1MHz .Using this ACDC converter, CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE is also accessible.Keep in mind that this AC to DC converter should always be set to 12V .
UC2875N Features
Packaged with 20-DIP (0.300, 7.62mm)
With 20 pins
Output Current at 2A
UC2875N Applications
There are a lot of Texas Instruments UC2875N AC DC Converters applications.
- Cellular phone chargers
- Adaptors for DSCs
- AC--DC Adapter
- Linear Adapter Replacements
- Auxiliary Power Supply
- Universal input AC/DC adapters (15W - 45W)
- Remotely-controlled appliances
- Standby Power for General Off-Line Applications
- PDAs
- Utility meters
