UC2875NG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.259996g |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UC2875 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Voltage | 5.08V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Control Technique | RESONANT CONTROL |
| Supply Current-Max (Isup) | 30mA |
| Nominal Input Voltage | 20V |
| Switcher Configuration | PHASE-SHIFT |
| Fault Protection | Current Limiting |
| Duty Cycle | 100% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 10.75V |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2875NG4 Overview
In the 20-DIP (0.300, 7.62mm) package, the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.The AC/DC converter is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -25°C~85°C TA °C to deliver its optimal performance.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.A range of 9.5V~20V supply voltages (Vcc/Vdd) can be used.In total, there are 20 terminations.There are 20 pins on the ac/dc converter.Up to 20 pins are present on the ac-dc converter.It is suitable for mounting by Through Hole .Search similar acdc converters based on UC2875 family members.There are 4 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .There is 500mA output current set.Its output voltage amounts to 5.08V .AC to DC converter reaches high efficiency when operated at a frequency of 1MHz .REACH SVHC standard can be found at No SVHC .When utilizing this ACDC converter, CAN ALSO BE CONFIGURED IN CURRENT MODE; PWM CONTROL TECHNIQUE ALSO POSSIBLE can also be discovered.In all situations, this AC to DC converter should be set to 12V .
UC2875NG4 Features
Packaged with 20-DIP (0.300, 7.62mm)
With 20 pins
Output Current at 500mA
UC2875NG4 Applications
There are a lot of Texas Instruments UC2875NG4 AC DC Converters applications.
- Power tools
- Portable audio
- Utility meters
- AC-DC Output Power Conversion Applications
- Standby power supplies for IR
- Automotive Telematics
- Cleaners
- Smartphones
- Battery chargers for cordless
- MPS parts
