UC2875SDWREP
| Parameters | |
|---|---|
| Control Technique | RESONANT CONTROL |
| Nominal Input Voltage | 12V |
| Switcher Configuration | PHASE-SHIFT |
| Fault Protection | Current Limiting |
| Max Duty Cycle | 100 % |
| Duty Cycle | 100% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 10.75V |
| Height | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 792.000628mg |
| Operating Temperature | -25°C~110°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 1MHz |
| Base Part Number | UC2875 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Output Voltage | 1.7V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
UC2875SDWREP Overview
There is a ac to dc converter embedded in package 28-SOIC (0.295, 7.50mm Width) .In Tape & Reel (TR) AC/DC power converter, it is available.As you can see, this AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -25°C~110°C °C.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.The AC/DC converter is capable of being used when the supply voltage is 9.5V~20V (Vcc/Vdd).There are a total of 28 terminations.In this ac/dc converter, there are 28 pins.In this ac-dc converter, there are 28 pins.If you select the UC2875 family, you will be able to search for similar acdc converters.There are 4 outputs to run.AC to DC converter is included in Switching Regulator or Controllers .It has been set to 500mA for the output current.It produces a voltage of 1.7V .The power AC DC is capable of high efficiency when operated at a frequency of 1MHz .Also, CAN ALSO BE CONFIGURED IN CURRENT MODE can be found using this ACDC converter.At all times, this AC to DC converter should be set to 12V .
UC2875SDWREP Features
Packaged with 28-SOIC (0.295, 7.50mm Width)
With 28 pins
Output Current at 500mA
UC2875SDWREP Applications
There are a lot of Texas Instruments UC2875SDWREP AC DC Converters applications.
- Portable audio
- AC--DC Adapter
- Battery Chargers
- Standby Power Supplies
- Lighting controls
- Adapters for Handheld Electronics
- Cellular phone chargers
- Battery chargers for mobile devices with touchpad display
- Replacements for bulky plug-in transformers
- USB type-c v1.2 chargers with optional VDM
