UC2876N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 11V |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 3A |
| Frequency - Switching | 1MHz |
| Input Voltage (Max) | 20V |
| Control Technique | RESONANT CONTROL |
| Switcher Configuration | PHASE-SHIFT |
| Fault Protection | Current Limiting |
| Duty Cycle | 100% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 15.25V |
| Height Seated (Max) | 5.08mm |
| Length | 25.4mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
UC2876N Overview
The ac to dc converter is embedded in 20-DIP (0.300, 7.62mm) package.Tube case is available for the ac dc converter.As you can see, this AC/DC converter is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -25°C~85°C TA °C to deliver its optimal performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.Switching frequency reaches 1MHz Hz.This AC/DC converter is designed for use within the range of 9.5V~20V supply voltage (Vcc/Vdd).As a result, it has a total of 20 terminations.There are 20 pins in total.Based on a unique technique, it is possible to ensure input voltages with the maximal value of 20V .It is possible to supply the ac to dc inverter with a maximum current of 3A .It is also possible to discover CAN ALSO BE CONFIGURED IN CURRENT MODE when using this ACDC converter.
UC2876N Features
Packaged with 20-DIP (0.300, 7.62mm)
Switching Frequency at 1MHz
UC2876N Applications
There are a lot of Rochester Electronics, LLC UC2876N AC DC Converters applications.
- Appliance Power Supplies
- Utility meters
- Power tools fast chargers with trickle and on/off
- AC?DC USB chargers for Tablets
- Tablets
- Battery chargers for media tablets
- Networking
- Adapter for ADSL
- USB type-c v1.2 chargers with optional VDM
- Power Adaptors
