UC2876N
| Parameters | |
|---|---|
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UC2876 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Voltage | 1.7V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 9.5V~20V |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Control Technique | RESONANT CONTROL |
| Nominal Input Voltage | 20V |
| Switcher Configuration | PHASE-SHIFT |
| Fault Protection | Current Limiting |
| Duty Cycle | 100% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 15.25V |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.259996g |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
UC2876N Overview
This ac to dc converter is included in the package 20-DIP (0.300, 7.62mm) .Tube case is available for the ac dc converter.There is a mounting point for this AC/DC converter in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -25°C~85°C TA in order to ensure its performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.It can be used within the range of 9.5V~20V supply voltage (Vcc/Vdd).There are a total of 20 terminations.On the ac/dc converter, there are 20 pins.The pins of the ac-dc converter count up to 20 .There are no problem mounting the ac dc converters by Through Hole .A similar acdc converter can be searched by using the UC2876 family.Running 4 outputs is available.The ac to dc conversions are included in Switching Regulator or Controllers .500mA is set as the output current.The output voltage of the AC/DC converter is 1.7V .AC to DC converter is able to reach high efficiency when its frequency is 1MHz .It is also possible to determine CAN ALSO BE CONFIGURED IN CURRENT MODE using this ACDC converter.
UC2876N Features
Packaged with 20-DIP (0.300, 7.62mm)
With 20 pins
Output Current at 500mA
UC2876N Applications
There are a lot of Texas Instruments UC2876N AC DC Converters applications.
- 3.3V power supplies
- Standby power supplies for VCR
- Standby Power for General Off-Line Applications
- Battery Chargers
- Home Appliance Applications
- Power Adaptors
- IoT Applications
- Air Conditioning
- WiFi Wireless
- Chargers for cell/cordless phones
