UC2879N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.259996g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO HAS CONTROL MODE OF IPK, ALSO HAS CONTROL TECHNIQUE OF RESONANT |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Frequency | 300kHz |
| Base Part Number | UC2879 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Voltage | 2.2V |
| Max Output Current | 20mA |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 9.25V~20V |
| Control Features | Frequency Control, Soft Start, Sync |
| Max Output Voltage | 5V |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 18V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 12V |
| Switcher Configuration | PHASE-SHIFT |
| Fault Protection | Current Limiting |
| Duty Cycle | 50% |
| Output Isolation | Non-Isolated |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2879N Overview
In the package 20-DIP (0.300, 7.62mm) , the ac to dc converter is embedded.The AC/DC power converter type is Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~85°C TA .SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.Within the range of 9.25V~20V supply voltage (Vcc/Vdd), it can be used.In total, it has 20 terminations.In this ac/dc converter, there are 20 pins.In this ac-dc converter, there are 20 pins.It are possible to mount thare ac dc converters by Through Hole .Similar acdc converters can be found using the UC2879 family.In this AC to DC transformer, there are 4 outputs to run.There are a ac to dc conversions included in Switching Regulator or Controllers .Currently, the output current is set to 10mA .There is 2.2V voltage output from it.A high efficiency can be achieved by operating at a frequency of 300kHz .It is possible to read the REACH SVHC standard at: No SVHC .The AC to DC converter input voltage can be powered under 18V .When utilizing this ACDC converter, ALSO HAS CONTROL MODE OF IPK, ALSO HAS CONTROL TECHNIQUE OF RESONANT can also be discovered.
UC2879N Features
Packaged with 20-DIP (0.300, 7.62mm)
With 20 pins
Output Current at 10mA
UC2879N Applications
There are a lot of Texas Instruments UC2879N AC DC Converters applications.
- Remotely-controlled appliances
- Standby Power Supplies
- Adapters for Handheld Electronics
- USB type-c v1.2 chargers with optional VDM
- Standby Power for General Off-Line Applications
- Dimmers
- Handheld/Battery-Powered Systems
- Low-Voltage I/O System Power
- Auxiliary Power Supplies
- IoT Applications
