UC2914N
| Parameters | |
|---|---|
| Weight | 1.206102g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | UVLO |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~35V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 2.54mm |
| Depth | 6.35mm |
| Base Part Number | UC2914 |
| Pin Count | 18 |
| Output Voltage | 1.8V |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 1 |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Adjustable Threshold | YES |
| Current - Supply | 12mA |
| Nominal Input Voltage | 35V |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault |
| Feature Pins | CT, /FAULT, IMAX, LR, OSC, OSCB, PLIM, PMP, PMPB, REF, /SD, VPUMP |
| Height Seated (Max) | 5.08mm |
| Length | 22.48mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
UC2914N Overview
This is included in the 18-DIP (0.300, 7.62mm) package.At the moment, 1 channels are accessible.Tube-shaped packaging is used.The 18 terminations total to three.There is a DUAL terminal position on the device.In total, it has 18 pins.High efficiency can be achieved by using 12V as supply voltage.Through Hole sets it up.Hot Swap Controller?is?the?classification?for?this?electrical?component.A reliable operation requires the temperature to be set to -40°C~85°C.General Purpose applications can be downloaded from the device.There is a reference to it in UVLO.Using a 5V~35VV power source should be able to power the device.There are numbers in the UC2914 family that include it.A 18 pin is used for operation.As far as Power Management Circuits is concerned, this gadget is self-contained.The programmable features of this device are Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault.There is currently an adequate supply of 12mA.There is a Through Hole-axis orientation to it.The supply voltage (Vsup) should be kept above 5V for normal operation.In order to operate it, 20mA is the maximum current needed.An output voltage of 1.8V is capable of delivering high efficiency.
UC2914N Features
The terminal position of 18
Features of UVLO
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault
Output voltage of 1.8V
UC2914N Applications
There are a lot of Texas Instruments UC2914N hot swap controllers applications.
- Central office switching systems
- Undervoltage protection
- Data communication systems
- Hard drive
- Current limit and current foldback limit functions
- Modern analog communication
- Industrial application
- Short-circuit protection in real time
- Servers
- Overvoltage protection
