UC2950TG3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Weight | 1.930007g |
| Operating Temperature | -20°C~100°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | 5V Regulated Output |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Max Power Dissipation | 15W |
| Technology | Bipolar |
| Voltage - Supply | 8V~35V |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 300kHz |
| Base Part Number | UC2950 |
| Pin Count | 3 |
| Output Voltage | 3V |
| Max Output Current | 4A |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 36mA |
| Output Configuration | Half Bridge |
| Power Dissipation | 15W |
| Output Current | 4A |
| Max Supply Current | 36mA |
| Turn On Delay Time | 500 ns |
| Output Characteristics | TRI-STATE |
| Output Current per Channel | 2A |
| Turn-Off Delay Time | 2 μs |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Voltage - Load | 8V~35V |
| Fault Protection | Over Temperature |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 4A |
| Built-in Protections | THERMAL |
| Load Type | Inductive, Capacitive |
| Height | 4.7mm |
| Length | 10.16mm |
| Width | 8.51mm |
| Thickness | 4.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC2950TG3 Overview
Tube is used for packaging.Cost savings are achieved by including H bridge in the TO-220-5 package.Improved reliabilbridge drivery can be ensured based on the supply voltage of 8V~35V.In Through Hole, H bridge circuit is mounted.A normal operation of -20°C~100°C TJ is enabled by motor driver H bridges operating temperature.Among H bridge motor drivers many applications are General Purpose.Mount the board using Through Hole.5V Regulated Output is one of full bridges specific characteristics.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 5 terminations are employed.In a signal interface, the 5 pins serve as pronged contacts.This H bridge ic has a base H bridge ic number of UC2950 which allows more related H bridge ics to be identified.The H bridge is powered by a voltage supply of 12V.The maximum load current that power supply can provide at a specified ambient temperature reaches 4A.Output and power supply pins have a current of 4A.The 3 pins of this bridge driver work together to allow it to perform its specific functions.It is calculated that the Hbridge releases 3V volts.In the system, 2 drivers are integrated.
UC2950TG3 Features
Available in TO-220-5 Package / Case
Operating Temperature at the range of Through Hole
Interface IC Type : UC2950
UC2950TG3 Applications
There are a lot of Texas Instruments UC2950TG3 Full Bridge Drivers, Half-Bridge Drivers applications.
- VTR
- Voltage Regulators for GPUs
- Dual DC motor
- Voltage Regulators for CPUs
- Industrial Fans
- Optical disc drives
- Telecom Microprocessor
- Industrial Automation
- Audio-visual equipment
- CD players
