Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Weight |
473.692182mg |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Switching Regulator or Controllers |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Frequency |
500kHz |
Base Part Number |
UC3524 |
Function |
Step-Up, Step-Down, Step-Up/Step-Down |
Number of Outputs |
2 |
Output Voltage |
60V |
Output Type |
Transistor Driver |
Input Voltage-Nom |
20V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Operating Supply Current |
5mA |
Output Configuration |
Positive |
Output Current |
100mA |
Voltage - Supply (Vcc/Vdd) |
8V~40V |
Quiescent Current |
5mA |
Control Features |
Frequency Control |
Topology |
Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
Control Mode |
VOLTAGE-MODE |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
120ns |
Synchronous Rectifier |
No |
Fall Time (Typ) |
25 ns |
Nominal Input Voltage |
40V |
Max Duty Cycle |
50 % |
Duty Cycle (Max) |
45% |
Output Phases |
1 |
Height |
2.65mm |
Length |
10.3mm |
Width |
7.5mm |
Thickness |
2.35mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
UC3524ADW Overview
With its 16-SOIC (0.295, 7.50mm Width) package, the switching controller fits the needs of most applications. For outputs of 2, this dc motor controller is suitable. The pmic is packaged in Tube solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 8V~40V. Suitable for working in an dc switcher that has a 0°C~70°C TA. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Terminal (s) of the switching converters are designed at the DUAL position. Various 16 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. 20V nominal DC switcher's voltage input. UC3524 can be searched for other relevant dc to dc converter ics. There are only 16 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. Based on the test statistics, DC regulator outputs voltage 60V. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. Switching controller operates at 500kHz Hz. Dormant dc switchings use 5mA. Input voltage can be set to 40V for nominal working status. There is a 5mA volt supply current.
UC3524ADW Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz
UC3524ADW Applications
There are a lot of Texas Instruments UC3524ADW DC to DC converter applications.
- Digital precision reference circuits
- Linear guide
- Hydraulic presses
- Gear/thread machining machines
- Sensitive electronic devices
- Automatic testing equipment
- Medical equipment
- Industrial robots
- Automatic plug-in machines
- Arc suppression circuits