UC3524ADWTR
| Parameters | |
|---|---|
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 450kHz |
| Base Part Number | UC3524 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 80V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Control Features | Frequency Control |
| Topology | Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 120ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 25 ns |
| Nominal Input Voltage | 40V |
| Max Duty Cycle | 45 % |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
UC3524ADWTR Overview
Capsuled in the 16-SOIC (0.295, 7.50mm Width) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. The pmic is packaged in Tape & Reel (TR) solid enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 8V~40V volts and has 8V~40V supply voltage. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. The switching controller is capable of switching at the 500kHz position. It is suitable for general dc dc regulator when it is set to Surface Mount. To ensure efficient switching, this dcdc regulator features a Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 16 terminations are available in dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 20V. Searching "UC3524" will return other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Switching converter is a type of Switching Regulator or Controllers in particular. DC regulator outputs 80V voltage based on test statistics. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 45 % during power-up and power-down. The switching controller works at a frequency of 450kHz. 40V is the nominal working voltage.
UC3524ADWTR Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 450kHz
UC3524ADWTR Applications
There are a lot of Texas Instruments UC3524ADWTR DC to DC converter applications.
- Servo drive system
- Large fire protection systems
- Computer rooms
- Energy management systems
- Digital display device
- Gear/thread machining machines
- Industrial robots
- Production lines
- Combined machine tools
- Machining centers
