UC3524N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Control Features | Current Limit, Enable, Frequency Control, Ramp |
| Input Voltage (Min) | 8V |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Duty Cycle (Max) | 45% |
| Output Phases | 1 |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
UC3524N Overview
It comes in the 16-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. dc motor controller is suitable for 2 output generation. The pmic is packaged in Tube solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. dc controls with 8V~40V voltage are supplied and operated. Suitable for working in an dc switcher that has a 0°C~70°C TA. With this switching controller, you can switch at 300kHz. As it has a Through Hole value, it can be used for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Ramp which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of terminations with 16 of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The nominal DC switcher's voltage input is 20V. dc dc voltage regulators should have a minimum input voltage of 8V. According to the test statistics, DC regulator outputs 5V voltage. The dc to dc regulator is limited to 40V input voltage.
UC3524N Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit, Enable, Frequency Control, Ramp
PULSE WIDTH MODULATION
UC3524N Applications
There are a lot of Rochester Electronics, LLC UC3524N DC to DC converter applications.
- PSRR circuits
- Elevator lighting
- Current source circuits
- Correction machines
- Emergency lighting monitoring equipment
- Hydro power
- Milling machines
- Injection molding machinery
- Fire elevators
- Balance equipment
