UC3525AQTRG3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Frequency | 450kHz |
| Base Part Number | UC3525 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 35V |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Control Features | Enable, Frequency Control, Soft Start |
| Topology | Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100Hz~400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 35V |
| Max Duty Cycle | 49 % |
| Output Phases | 1 |
| Height Seated (Max) | 4.57mm |
| Length | 8.965mm |
| Width | 8.965mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC3525AQTRG3 Overview
The switching controller fits in the 20-LCC (J-Lead) package and is ideal for most applications. The dc motor controller is adquate to generate for 2 outputs. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 8V~35V. Suitable for work in a 0°C~70°C TA dc switcher. Using this switching controller, it is possible to switch at 100Hz~400kHz. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at QUAD. 20 terminations with various dc switching's functions. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis 20V volts. UC3525 can be used to locate other relevant dc to dc converter ics. 20 pins are on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 18V. It's important to remember that the dc dc regulator's normaloutput current is 100mA, so you should note it down when starting a new project. Voltage regulator dc to dc is designed to operate at 49 % duty cycle during power-ups and power-downs to ensure reliability. DC switcher's Surface Mount qualifies it for most applications and prototypes. Switching controller operates at 450kHz Hz. Users should apply 35V to operate the voltage regulator dc to dc safely and reliably. Input voltage can be set to 35V for nominal working status.
UC3525AQTRG3 Features
Transistor Driver Outputs
Switching Frequency: 100Hz~400kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 450kHz
UC3525AQTRG3 Applications
There are a lot of Texas Instruments UC3525AQTRG3 DC to DC converter applications.
- Flexible manufacturing cells
- Sensitive electronic devices
- Electrical distribution systems
- Low output voltage switching power supply circuits
- Various precision measuring detectors
- Product testing
- USB circuits
- Current source circuits
- Alternators
- Precision electronic equipment
