UC3527BNG4
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Frequency | 450kHz |
| Base Part Number | UC3527 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Control Features | Enable, Frequency Control, Soft Start |
| Topology | Forward Converter, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100Hz~400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 35V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Height | 4.57mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UC3527BNG4 Overview
This switching controller fits most application requirements since it is packaged in a 16-DIP (0.300, 7.62mm) package. dc motor controller is suitable for 2 output generation. Packaging for the pmic consists of Tube solid enclosures. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 8V~35V. Suitable for working in an dc switcher that has a 0°C~70°C TA. The switching controller can be switched at 100Hz~400kHz. dc dc regulators can be carried out with Through Hole. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a DUAL terminal on the switching converters. A variety of terminations with 16 of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The nominal DC switcher's voltage input is 20V. You can find other relevant dc to dc converter ics by searching "UC3527". 16 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 18V. You should note down the dc dc regulator's usual output current of 100mA when you start a project. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. A frequency of 450kHz is set for the switching controller. 35V is the nominal working voltage.
UC3527BNG4 Features
Transistor Driver Outputs
Switching Frequency: 100Hz~400kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
UC3527BNG4 Applications
There are a lot of Texas Instruments UC3527BNG4 DC to DC converter applications.
- Wind power
- Scientific research
- PSRR circuits
- Imported equipment
- Computer rooms
- Computer application technology
- Gear/thread machining machines
- Plate bending machines
- Overvoltage protection circuits in TV sets
- Smoke prevention equipment
