UC3637NG4
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 18 |
| Weight | 1.206102g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES -2.5V TO -20V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | BIPOLAR |
| Voltage - Supply | 2.5V~20V |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | UC3637 |
| Function | Controller - Commutation, Direction Management |
| Output Voltage | 13.5V |
| Max Output Current | 400mA |
| Supply Voltage-Max (Vsup) | 20V |
| Power Supplies | +-5+-15V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 8.5mA |
| Output Configuration | Pre-Driver - Half Bridge (4) |
| Output Current | 100mA |
| Supply Current-Max (Isup) | 15mA |
| Motor Type - AC, DC | Brushed DC |
| Height Seated (Max) | 5.08mm |
| Length | 22.48mm |
| Width | 7.62mm |
| Radiation Hardening | No |
UC3637NG4 Overview
This package is designed to work with [0].This part is packaged with a case of [0].Ideally, the part should be mounted by Through Hole.As a result, it is appropriate for the component connected to General Purpose.There is a capability for the device to provide 2.5V~20V volts.Regarding the operating temperature, it is in the range of 0°C~70°C TA°C.In this case, the motor type is Brushed DC.A total of 18terminations are available in this part.Drivers controllers is very important to keep in mind that this amplifier should be operated at 15V.An analog IC with the model number BRUSH DC MOTOR CONTROLLERis employed in the device.UC3637is the part number that finds it.This device is designed with a pin count of 18.The Motion Control Electronicsseries contains it.Drivers controllers is maintained at 13.5V volts.As it has a 100mAoutput current, it provides maximum design flexibility.Also, ALSO REQUIRES -2.5V TO -20V SUPPLYcan be found as a characteristic of this type.As a result, the maximum output current reaches 400mAin order to meet the requirements of the operation.
UC3637NG4 Features
Applications : General Purpose
base on UC3637 number
Additional Feature: ALSO REQUIRES -2.5V TO -20V SUPPLY
UC3637NG4 Applications
There are a lot of Texas Instruments UC3637NG4 motor drivers applications.
- Daytime running lights (DRLs)
- Smart lighting applications
- High power LED street light
- Emergency lighting
- Large format LED backlighting
- Horticultural applications
- Industrial high-bay lights
- Commercial office
- Large outdoor LED display
- Landscape lighting
