UC3705N
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~40V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Terminal Pitch | 2.54mm |
| Base Part Number | UC3705 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 40V |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 20V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 1W |
| Output Current | 1.5A |
| Max Supply Current | 4mA |
| Propagation Delay | 100 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 100 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 90ns |
| Fall Time (Typ) | 60 ns |
| Output Polarity | TRUE AND INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 60ns 60ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.06 µs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
UC3705N Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.There is a package in the form of Tube.In this case, gate drivers is mounted along the way of Through Hole.In the absence of a 5V~40V supply voltage, its superiority can be demonstrated.This device is designed with a N-Channel MOSFET gate type.There is a temperature range for this device of 0°C~70°C TA.Inverting, Non-Inverting is used as the input type.Mosfet driver is based on 8 terminations.There are various parts that can be found under its base part number UC3705.Mounting the device requires Through Hole.The pins are configured with 8 when designing the chip.In addition, it is specifically designed to operate with a supply voltage of 20V.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.There is a maximum output current of 1.5A.This subcategory of MOSFET Drivers has a number of useful electronic components.Components with 8 pins are available.The basis of this system consists of 1 outputs.The output current can be set to 1.5A.The maximum power dissipation of 1W shows its maximum capability to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 4mA in order to achieve greater stabilMosfet gate driversy.In this case, the voltage is 40V.As a rule of thumb, the operating supply voltage should be set to 20V.The input is characterized by STANDARD.
UC3705N Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
8 pins
Maximum power dissipation of 1W
UC3705N Applications
There are a lot of Texas Instruments UC3705N gate drivers applications.
- Digitally controlled power supplies
- Power factor correction (PFC) circuits
- A/D drivers
- Motor Drives
- Head-up and Head mounted displays
- Portable Media Players
- High-voltage isolated DC-DC converters
- Smart Phones
- PCMCIA applications
- Pulse transformer drivers
