UC3705T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Weight | 1.930007g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 3W |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~40V |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Base Part Number | UC3705 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Voltage | 40V |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 20V |
| Nominal Supply Current | 12mA |
| Power Dissipation | 3W |
| Output Current | 1.5A |
| Max Supply Current | 12mA |
| Propagation Delay | 100 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 90ns |
| Fall Time (Typ) | 60 ns |
| Rise / Fall Time (Typ) | 60ns 60ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.2V |
| Turn Off Time | 0.06 µs |
| Height | 8.51mm |
| Length | 10.16mm |
| Width | 4.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC3705T Overview
For greater flexibility, its TO-220-5 package is used.Tube represents the packaging method.There is a mounting bracket in the way of Through Hole.When the supply voltage is 5V~40V it is able to demonstrate its superiority.N-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of 0°C~70°C TA.Inverting, Non-Inverting is used as the input type in this program.The configuration is based on 5 terminations.The base part number UC3705 refers to a number of related parts.The device is mounted using Through Hole.As a result, it is configured with 5 pins when it is designed.The device is specifically designed to operate at 20V volts.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.There is a maximum output current of 1.5A that can be achieved.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A board with 3 component pins is available.Based on its basis, it integrates 1 outputs.This device supports a current output of 1.5A at the output.Having the maximum power dissipation of 3W indicates its maximum capacity to conduct power losses without overheating.For higher stability, the supply current should be kept at 12mA.A voltage of 40V is output by this device.Mosfet gate drivers is recommended that the operating supply voltage be set to 20V volts.
UC3705T Features
Embedded in the Tube package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 3W
UC3705T Applications
There are a lot of Texas Instruments UC3705T gate drivers applications.
- Isolated Gate Driver Supplies
- Industrial Motor Inverter - Power Tools, Robotics
- serial peripheral interface (SPI), I2C
- Automotive Applications
- High power buffers
- Telecom switch mode power supplies
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Portable Navigation Devices
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Line drivers
