UC3708N
| Parameters | |
|---|---|
| Number of Functions | 2 |
| Supply Voltage | 20V |
| Base Part Number | UC3708 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Power Supplies | 10/35V |
| Element Configuration | Dual |
| Nominal Supply Current | 26mA |
| Output Current | 3A |
| Max Supply Current | 26mA |
| Propagation Delay | 25 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 45ns |
| Fall Time (Typ) | 50 ns |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.075 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.055 μs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~35V |
UC3708N Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.A packaging method of Tube is used.In the direction of Through Hole, gate drivers is mounted.In the absence of a 5V~35V supply voltage, it can demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.In this device, temperatures must not exceed 0°C~70°C TA.The input type for this program is Non-Inverting.Its configuration starts with 8 terminations.There are various parts that can be found under its base part number UC3708.The device is mounted with Through Hole.The pins are configured with 8 when designing the chip.In addition, it is specifically designed to operate with a supply voltage of 20V.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.The maximum output current can amount to 3A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The number of component pins is 8.Based on its basis, it integrates 2 outputs.An output current of 3A is supported.Mosfet gate drivers is recommended to keep the supply current at 26mA to ensure greater stabilMosfet gate driversy.With its 10/35V power supply, it provides power for diverse applications.Its input is characterized by STANDARD.
UC3708N Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC3708N Applications
There are a lot of Texas Instruments UC3708N gate drivers applications.
- AC-DC Inverters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Topologies
- High-speed communications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Head-up and Head mounted displays
- High power buffers
- Commercial air-conditioning (CAC)
- Solar power supplies
- Telecom switch mode power supplies
