UC3708NG4
| Parameters | |
|---|---|
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.075 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.055 µs |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~35V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 20V |
| Base Part Number | UC3708 |
| Pin Count | 8 |
| Output Voltage | 35.3V |
| Max Output Current | 3A |
| Power Supplies | 10/35V |
| Nominal Supply Current | 26mA |
| Output Current | 3A |
| Max Supply Current | 26mA |
| Propagation Delay | 25 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 45ns |
| Fall Time (Typ) | 50 ns |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 25ns 25ns |
UC3708NG4 Overview
For greater flexibility, the 8-DIP (0.300, 7.62mm) package is adopted.Tube is the packaging method.2 drivers are incorporated for its configuration.It's mounted on the way to Through Hole.When the supply voltage is set to 5V~35V, it can demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.0°C~70°C TA is the allowed temperature range for this device.This program uses the input type of Non-Inverting.Its configuration starts with 8 terminations.There are various related parts under its base part number UC3708.Mosfet driver is mounted using the Through Hole method.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 20V.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.3A is the maximum output current.There are several useful electronic components within its subcategory MOSFET Drivers.The board contains 8 pins for component connections.This device supports a current output of 3A at the output.For higher stability, the supply current should be kept at 26mA.With its power supplies of 10/35V, it solves the problems of power supply for a variety of applications.The voltage it outputs is 35.3V.This function has an input of STANDARD.
UC3708NG4 Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC3708NG4 Applications
There are a lot of Texas Instruments UC3708NG4 gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated Supplies for Motor Control
- Isolated Supplies for controller area network (CAN),
- A/D drivers
- High-speed communications
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Digitally controlled power supplies
- High power buffers
- Industrial motor drives - compact, standard, premium, servo drives
- Portable computers
