UC3710DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.7V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | UC3710 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Max Output Current | 6A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 5mA |
| Output Current | 6A |
| Max Supply Current | 35mA |
| Propagation Delay | 30 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 30 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 70ns |
| Fall Time (Typ) | 80 ns |
| Output Polarity | TRUE AND INVERTED |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 85ns 85ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.07 µs |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.08 µs |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC3710DW Overview
For greater flexibility, the 16-SOIC (0.295, 7.50mm Width) package is adopted.The packaging method is indicated by Tube.There is a mounting bracket in the way of Surface Mount.In the absence of a power supply voltage of 4.7V~18V V, it is able to demonstrate its superiority.Gate type IGBT, N-Channel MOSFET is designed for it.This device can operate at temperatures up to -55°C~150°C TJ.This program uses the input type of Inverting, Non-Inverting.The configuration is based on 16 terminations.There are numerous related parts listed under its base part number UC3710.The mount method is Surface Mount.The pins are configured with 16 when designing the chip.The device is specifically designed to function with a supply voltage of 15V V.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.Mosfet driver is possible to achieve a maximum output current of 6A.Its subcategory of MOSFET Drivers contains various useful electronic components.The board has a total of 16 component pins.In terms of its basis, there are 1 outputs integrated.The output current of this device can be set to 6A.In order to ensure greater stability, it is recommended to keep the supply current at 35mA.A voltage of 15V should be set for the operating supply voltage.This function has an input of STANDARD.
UC3710DW Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
16 pins
UC3710DW Applications
There are a lot of Texas Instruments UC3710DW gate drivers applications.
- Broadcast equipment
- Motor Controls
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated switch mode power supplies (SMPS)
- LCD/LCoS/DLP portable and embedded pico projectors
- serial peripheral interface (SPI), I2C
- Power factor correction (PFC) circuits
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Commercial air-conditioning (CAC)
- High current laser/LED systems
