UC37131D
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UC37131 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 700mA |
| Operating Supply Voltage | 65V |
| Power Supplies | 25V |
| Interface | On/Off |
| Nominal Supply Current | 2.5mA |
| Output Configuration | Low Side |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 2.5mA |
| Propagation Delay | 6 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 8V |
| Max Input Voltage | 65V |
| Output Current per Channel | 300mA |
| Nominal Input Voltage | 65V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~65V |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 0.9A |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UC37131D Overview
Tube is the way it's packaged.It is included in the package 8-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.It is recommended to set the temperature to 0°C~70°C TA in order to ensure reliable operation.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.A maximum voltage of Bipolar volts is available from the output of this LED driver.There is a UC37131 family of things that it belongs to.In total, there are 8 terminations.For operation, we use the 8 pins.It is important to note that the LED driving board has 1 functions.This results in the maximum output current dropping to 700mA to meet the operation criteria.The supply voltage can be 25V for high efficiency.As a result, it has a total of 8 pins.The output current is set to 300mA in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In this case, the power supply is 25V.It is recommended that the supply voltage be set at 65V in order to achieve maximum efficiency.This LED driving board can accept voltages up to 65V volts as an input.There is a minimum input voltage of 8V volts.This system has a maximum current requirement of 2.5mA.
UC37131D Features
Supplied from 25V
UC37131D Applications
There are a lot of Texas Instruments UC37131D Power Switches ICs applications.
- Portable Music Players
- USB Power Distribution
- Smart Phones, Feature Phones
- Wireless Headsets
- Notebook PC
- Portable Devices
- Hard Disk Drives
- Handheld Devices
- Hot Swap
- HDD, SSD
