UC37131DG4
| Parameters | |
|---|---|
| Interface | On/Off |
| Nominal Supply Current | 2.5mA |
| Output Configuration | Low Side |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 2.5mA |
| Propagation Delay | 6 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 8V |
| Max Input Voltage | 65V |
| Nominal Input Voltage | 65V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~65V |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 0.9A |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UC37131 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 700mA |
| Operating Supply Voltage | 65V |
| Power Supplies | 25V |
UC37131DG4 Overview
It's?packaged?in?the way?of?a?Tube.There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.A Surface Mount mounting is used for the LED driving board.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to 0°C~70°C TA for reliable performance.There are 1 outputs available on this lighting driver.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of Bipolar volts has been specified.This object belongs to the UC37131 family.It has a total of 8 terminations.The 8 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.The maximum output current is reduced to 700mA to meet the operation criteria.Using a voltage of 25V allows for high efficiency.8 pins are equipped with it.This case results in a 300mA output current.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.It has a power supply of 25V.It is recommended that the supply voltage be set at 65V in order to achieve maximum efficiency.There is a maximum input voltage of 65V volts.As a minimum input voltage, it requires 8V volts.There is a maximum current requirement of 2.5mA for its operation.
UC37131DG4 Features
Supplied from 25V
UC37131DG4 Applications
There are a lot of Texas Instruments UC37131DG4 Power Switches ICs applications.
- Wearable Devices
- Hot-Swap Systems
- USB Power Distribution
- Portable GPS
- USB Power Distribution
- Portable GPS Device
- Solid-State Drives
- Gaming
- HDD, SSD
- Smartphone and PDA
