UC37132D
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Base Part Number | UC37132 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | Bipolar |
| Max Output Current | 700mA |
| Operating Supply Voltage | 65V |
| Power Supplies | 25V |
| Interface | On/Off |
| Output Configuration | High Side or Low Side |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 2.5mA |
| Propagation Delay | 6 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 8V |
| Max Input Voltage | 65V |
| Output Current per Channel | 300mA |
| Nominal Input Voltage | 65V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~65V |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 0.9A |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC37132D Overview
It is package in Tube case.Package 16-SOIC (0.154, 3.90mm Width) contains it.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.It is best to set the temperature to 0°C~70°C TA to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of Bipolar volts.I believe it belongs to the UC37132 family.It contains 16 terminations.For operation, 16 pins are used.It is important to note that the LED driving board has 1 functions.The maximum output current drops to 700mA in order to meet the operation criteria.The supply voltage can be 25V for high efficiency.There are 8 pins in total on this board.This results in a 300mA output current.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.This part has a power supply of 25V volts.When using this LED driving board, it is recommended that the supply voltage is set to 65V.There is a maximum input voltage of 65V volts.The input voltage minimum is 8V volts.For its operation, a maximum current requirement of 2.5mA is required.
UC37132D Features
Supplied from 25V
UC37132D Applications
There are a lot of Texas Instruments UC37132D Power Switches ICs applications.
- Notebook PC
- Handheld Devices
- Low Voltage I/O System Power
- Hot Swap
- USB Ports/Hubs
- Notebook and Tablet Computers
- Hot Swaps
- Portable Devices
- HDD and SSD
- Storage Drives
