UC37133D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 25V |
| Base Part Number | UC37133 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | Bipolar |
| Max Output Current | 700mA |
| Operating Supply Voltage | 65V |
| Power Supplies | 25V |
| Interface | On/Off |
| Nominal Supply Current | 2.3mA |
| Output Configuration | High Side |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 2.3mA |
| Propagation Delay | 6 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 8V |
| Max Input Voltage | 65V |
| Output Characteristics | OPEN-EMITTER |
| Nominal Input Voltage | 65V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~65V |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 0.9A |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC37133D Overview
The package is in the form of a Tube.Package 8-SOIC (0.154, 3.90mm Width) contains it.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.It is recommended to set the temperature to 0°C~70°C TA in order to ensure reliable operation.By default, it is set to output 1.Operation is based on a supply voltage of Not Required.A maximum output voltage of Bipolar volts has been specified.The UC37133 family contains this object.It contains 8 terminations.For operation, 8 pins are used.It has 1 functions.It is necessary to reduce the maximum output current to 700mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 25V.The LED driver has a total of 8 pins.This case results in a 300mA output current.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.This part is powered by 25V.In order to maximize efficiency, the supply voltage should be set to 65V.The maximum input voltage of the LED driver is 65V volts.As a minimum input voltage, it requires 8V volts.It has a maximum current requirement of 2.3mA.
UC37133D Features
Supplied from 25V
UC37133D Applications
There are a lot of Texas Instruments UC37133D Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Solid-State Drives
- USB Ports/Hubs
- Notebook PC
- Solid State Drivers
- Notebook and Tablet Computers
- Portable Video Game Players
- Various applications equipped with buttons
- Portable Devices
- Wireless/Networking Cards
