banner_page

UC37133N

25V Bipolar 2.54mm PMIC UC37133 8 Pin 25V 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-UC37133N
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 216
  • Description: 25V Bipolar 2.54mm PMIC UC37133 8 Pin 25V 8-DIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Weight 528.605208mg
Operating Temperature 0°C~70°C TA
Packaging Tube
JESD-609 Code e4
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Terminal Position DUAL
Number of Functions 1
Supply Voltage 25V
Terminal Pitch 2.54mm
Base Part Number UC37133
Pin Count 8
Number of Outputs 1
Output Type Bipolar
Max Output Current 700mA
Operating Supply Voltage 65V
Power Supplies 25V
Interface On/Off
Nominal Supply Current 2.3mA
Output Configuration High Side
Output Current 300mA
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 2.3mA
Propagation Delay 6 μs
Input Type Non-Inverting
Turn On Delay Time 6 μs
Switch Type General Purpose
Min Input Voltage 8V
Max Input Voltage 65V
Output Current per Channel 300mA
Nominal Input Voltage 65V
Ratio - Input:Output 1:1
Voltage - Load 8V~65V
Driver Number of Bits 1
Output Peak Current Limit-Nom 0.9A
Built-in Protections TRANSIENT; OVER CURRENT
Height Seated (Max) 5.33mm
Width 7.62mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

UC37133N Overview


It is package in Tube case.This package is included in 8-DIP (0.300, 7.62mm).This LED driving board is mounted using the mounting type Through Hole.It owns the General Purpose switch type.The temperature should be set to 0°C~70°C TA to ensure reliable functioning.The LED driver has a total of 1 outputs.To operate, it needs a supply voltage of Not Required.A maximum output voltage of Bipolar volts can be achieved by this LED driver.As you can see, it comes from the UC37133 family.In total, there are 8 terminations.8 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.To comply with the operation criteria, the maximum output current is reduced to 700mA.High efficiency is possible when the supply voltage is set to 25V.In total, it has 8 pins.It is set to 300mA in this case.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this case, the power supply is 25V.In order to maximize efficiency, the supply voltage should be set at 65V.As far as input voltage goes, its maximum is 65V volts.A voltage of 8V volts is the minimum input voltage.It operates at a maximum current of 2.3mA.

UC37133N Features


Supplied from 25V

UC37133N Applications


There are a lot of Texas Instruments UC37133N Power Switches ICs applications.

  • HDD, SSD
  • Notebook and Tablet Computers
  • PDAs
  • Portable/Handheld Devices
  • Handheld Devices
  • Smartphone and PDA
  • USB3.1 Power Delivery
  • USB Protection
  • Portable GPS
  • Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good