UC3714D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 7V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Base Part Number | UC3714 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 24mA |
| Output Current | 1A |
| Max Supply Current | 24mA |
| Propagation Delay | 100 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 30ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Driver Number of Bits | 2 |
| Channel Type | Synchronous |
| Turn On Time | 0.1 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.1 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC3714D Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is used.Its recommended mounting way is Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 7V~20V supply voltage.The gate type on this device is N-Channel, P-Channel MOSFET.Temperature range 0°C~150°C TJ is allowed for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.The configuration starts with 8 terminations.Under its base part number UC3714, various related parts can be found.In this case, Surface Mount indicates how the device is mounted.A total of 8 pins are available on the device.In addition, it is specifically designed to operate with a supply voltage of 15V.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 2A that can be achieved.This subcategory of Peripheral Drivers has a number of useful electronic components.Components with 8 pins are available.The basis of this system consists of 2 outputs.1A is the maximum output current supported by the device.Mosfet gate drivers is recommended that you keep the supply current at 24mA in order to achieve greater stabilMosfet gate driversy.Mosfet gate drivers is recommended that you set the operating supply voltage to 15V.There is a STANDARD value associated with its input.A higher frequency of 1MHz will improve efficiency.
UC3714D Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC3714D Applications
There are a lot of Texas Instruments UC3714D gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Topologies
- Commercial and agricultural vehicles (CAV)
- serial peripheral interface (SPI), I2C
- Isolated switch mode power supplies (SMPS)
- Industrial Motor Inverter - Power Tools, Robotics
- Solar power supplies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- General Purpose 3-Phase Inverter
- Refrigerator
