Parameters |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
8 |
Weight |
72.603129mg |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
2 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
Peripheral Drivers |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
250 |
Number of Functions |
1 |
Supply Voltage |
15V |
Frequency |
1MHz |
Pin Count |
8 |
Number of Outputs |
2 |
Max Output Current |
2A |
Power Supplies |
15V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
20V |
Min Supply Voltage |
7V |
Nominal Supply Current |
24mA |
Max Supply Current |
24mA |
Current - Output |
1A |
Propagation Delay |
100 ns |
Turn On Delay Time |
100 ns |
Rise Time |
60ns |
Fall Time (Typ) |
60 ns |
Input Characteristics |
STANDARD |
Interface IC Type |
BUFFER OR INVERTER BASED MOSFET DRIVER |
Driver Number of Bits |
2 |
Turn On Time |
0.1 µs |
Output Peak Current Limit-Nom |
2A |
High Side Driver |
YES |
Turn Off Time |
0.1 µs |
Height |
1.58mm |
Length |
4.9mm |
Width |
3.91mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
UC3714DG4 Overview
A higher degree of flexibility is achieved by adopting its SOIC package.The configuration is based on 8 terminations.Surface Mount is the way it takes to mount the device.When the device is designed, it has 8 pins.A voltage of 15V is required for its operation.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.Mosfet driver is possible for the output current to be as low as 2A.In this subcategory of Peripheral Drivers, there are numerous useful electronic components.The component has 8 pins.The basis of this system consists of 2 outputs.Mosfet gate drivers is permissible to operate at a temperature of 70°C.Mosfet gate drivers is permissible to operate at a temperature of 0°C.To ensure high stability, the supply current should be kept at 24mA.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.20V is its maximum operating voltage.Its minimum operating voltage is 7V.Currently, 1A is the current it outputs.There is a STANDARD value associated with its input.The frequency of 1MHz can improve efficiency.
UC3714DG4 Features
8 pins
UC3714DG4 Applications
There are a lot of Texas Instruments UC3714DG4 gate drivers applications.
- A/D drivers
- RGB applications
- Motor controllers
- Welding
- Head-up and Head mounted displays
- Power factor correction (PFC) circuits
- Active Clamp Flyback or Forward and Synchronous Rectifier
- serial peripheral interface (SPI), I2C
- Isolated Gate Driver Supplies
- Industrial Motor Inverter - Power Tools, Robotics