UC3714DTR
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 7V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UC3714 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 24mA |
| Output Current | 1A |
| Max Supply Current | 24mA |
| Propagation Delay | 100 ns |
| Input Type | Non-Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 30ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.1 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.1 µs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~150°C TJ |
UC3714DTR Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A packaging method of Tape & Reel (TR) is indicated.Configuration is supported by 2 drivers.Surface Mount is mounted in the way.By using 7V~20V supply voltage, it is able to demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.Temperature range 0°C~150°C TJ is allowed for this device.Mosfet driver accepts input of type Non-Inverting.Initially, the configuration is composed of 8 terminations.Numerous related parts can be found under its base part number UC3714.You mount it with Surface Mount.When designing, the device is configured with 8 pins.The device is specifically designed to function with a supply voltage of 15V V.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 2A.There are several useful electronic components in this subcategory of Peripheral Drivers.A board with 8 component pins is available.The output current supported by the device is 1A.The supply current should be kept at 24mA to ensure higher stability.The operating supply voltage should be set at 15V.By using 1MHz frequency, efficiency can be increased.
UC3714DTR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC3714DTR Applications
There are a lot of Texas Instruments UC3714DTR gate drivers applications.
- Motor Drives
- 3-Phase Motor Inverter Driver
- serial peripheral interface (SPI), I2C
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- General Purpose 3-Phase Inverter
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Commercial air-conditioning (CAC)
- Dual-Battery Systems
- LCD/LCoS/DLP portable and embedded pico projectors
- High-speed communications
