UC3714N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 7V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Base Part Number | UC3714 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 24mA |
| Output Current | 1A |
| Max Supply Current | 24mA |
| Propagation Delay | 100 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Rise / Fall Time (Typ) | 30ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.1 μs |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UC3714N Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.Tube represents the packaging method.Configuration is supported by 2 drivers.Through Hole is mounted in the way.By using 7V~20V supply voltage, it is able to demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of 0°C~150°C TJ.Non-Inverting is the input type used in this program.As a result of its configuration, it contains a maximum of 8 terminations.The base part number UC3714 refers to a number of related parts.The mount method is Through Hole.When the device is designed, it has 8 pins.The device is specifically designed to operate at 15V volts.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 2A can be achieved at maximum power.The subcategory of Peripheral Drivers contains a wide variety of useful electronic components.The component has 8 pins.Mosfet gate drivers supports a current output of 1A.The supply current should be kept at 24mA to ensure higher stability.Setting the operating supply voltage to 15V is recommended.By using the frequency 1MHz, we can increase efficiency.
UC3714N Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC3714N Applications
There are a lot of Texas Instruments UC3714N gate drivers applications.
- UPS systems
- 3-Phase Motor Inverter Driver
- Commercial and agricultural vehicles (CAV)
- Multicolor LED/laser displays
- Industrial motor drives - compact, standard, premium, servo drives
- High power buffers
- White Goods - Air Conditioner, Washing Machine,
- Motor Control
- Portable Media Players
- General Purpose 3-Phase Inverter
