UC3715DPG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 156.489368mg |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 7V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UC3715 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Power Supplies | 15V |
| Nominal Supply Current | 24mA |
| Output Current | 2A |
| Propagation Delay | 100 ns |
| Input Type | Non-Inverting |
| Rise Time | 30ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 30ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.1 μs |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UC3715DPG4 Overview
For greater flexibility, its 16-SOIC (0.154, 3.90mm Width) package is used.Tube represents the package.Configuration is based on 2 drivers.The device is mounted in the direction of Surface Mount.When the supply voltage is set to 7V~20V, it can demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of 0°C~150°C TJ.The input type is Non-Inverting.There are 16 terminations to form the base of its configuration.There are various parts that can be found under its base part number UC3715.The mount method is Surface Mount.When designing, the device is configured with 16 pins.Specification is for 15V supply voltage operation.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 2A.This subcategory of Peripheral Drivers has a number of useful electronic components.The component has 16 pins.This device supports a current output of 2A at the output.Using its power supply of 15V, it provides solutions to diverse power supply problems.By using the frequency 1MHz, we can increase efficiency.
UC3715DPG4 Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
16 pins
UC3715DPG4 Applications
There are a lot of Texas Instruments UC3715DPG4 gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- DC/DC converters
- PCMCIA applications
- Video amplifiers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Commercial air-conditioning (CAC)
- Power factor correction (PFC) circuits
- Line drivers
- DC-DC Converters
- Motor Drives
