UC3715N
| Parameters | |
|---|---|
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.1 μs |
| Height | 4.57mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 7V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Base Part Number | UC3715 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 24mA |
| Output Current | 2A |
| Max Supply Current | 24mA |
| Propagation Delay | 100 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Rise / Fall Time (Typ) | 30ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 1A |
| High Side Driver | YES |
UC3715N Overview
For greater flexibility, the 8-DIP (0.300, 7.62mm) package is adopted.A packaging method of Tube is indicated.2 drivers are incorporated for its configuration.Its recommended mounting way is Through Hole.When the supply voltage is 7V~20V it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is 0°C~150°C TJ.The input type for this program is Non-Inverting.8 terminations constitute its foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number UC3715.Through Hole is the way it takes to mount the device.A total of 8 pins are available on the device.The device is specifically designed to function with a supply voltage of 15V V.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.2A is the maximum output current.Several electronic components are included in its subcategory of Peripheral Drivers.The board has 8 component pins.Mosfet gate drivers can deliver a current of 2A.To ensure high stability, the supply current should be kept at 24mA.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 15V.The frequency of 1MHz can be used to improve efficiency.
UC3715N Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC3715N Applications
There are a lot of Texas Instruments UC3715N gate drivers applications.
- High power buffers
- Power factor correction (PFC) circuits
- Motor Drives
- Portable computers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Solar inverters
- LCD/LCoS/DLP portable and embedded pico projectors
- High-voltage isolated DC-DC converters
- High-speed communications
- Refrigerator
