UC3715NG4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BIPOLAR |
| Voltage - Supply | 7V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Base Part Number | UC3715 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Power Supplies | 15V |
| Nominal Supply Current | 24mA |
| Output Current | 2A |
| Max Supply Current | 24mA |
| Propagation Delay | 100 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Rise / Fall Time (Typ) | 30ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 500mA 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.1 μs |
| Height | 4.57mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UC3715NG4 Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Tube is the packaging method.Gate drivers is configured wGate driversh 2 drivers.The device is mounted in the direction of Through Hole.By using 7V~20V supply voltage, it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as 0°C~150°C TJ.Non-Inverting is used as its input type.Its configuration is based on a total of 8 terminations.Many related parts can be found under its base part number UC3715.In this case, Through Hole indicates how the device is to be mounted.When designing, the device is configured with 8 pins.This device operates with 15V supply voltage.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.In the maximum case, the output current can be 2A volts.There are various useful electronic components in its subcategory Peripheral Drivers.The board contains 8 pins for component connections.Mosfet gate drivers can deliver a current of 2A.The supply current should be kept at 24mA to ensure higher stability.With its 15V power supply, it provides power for diverse applications.By increasing the frequency of 1MHz, efficiency can be improved.
UC3715NG4 Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC3715NG4 Applications
There are a lot of Texas Instruments UC3715NG4 gate drivers applications.
- General Purpose 3-Phase Inverter
- Topologies
- Video amplifiers
- Isolated Gate Driver Supplies
- High power buffers
- Digitally controlled power supplies
- RGB applications
- LCD/LCoS/DLP portable and embedded pico projectors
- Commercial and agricultural vehicles (CAV)
- Motor Drives
