UC3717AN
| Parameters | |
|---|---|
| Base Part Number | UC3717 |
| Pin Count | 16 |
| Output Voltage | 46V |
| Max Output Current | 1A |
| Power Supplies | 510/40V |
| Supply Voltage-Min (Vsup) | 10V |
| Interface | Logic |
| Nominal Supply Current | 7mA |
| Output Configuration | Half Bridge (2) |
| Output Current | 800mA |
| Output Current per Channel | 1A |
| Supply Current-Max (Isup) | 15mA |
| Collector Emitter Voltage (VCEO) | 46V |
| Max Collector Current | 1A |
| Voltage - Load | 10V~46V |
| Fault Protection | Over Temperature |
| Motor Type | Stepper |
| Load Type | Inductive |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose, Stepper Motors |
| Additional Feature | IT ALSO REQUIRES 10V TO 46V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 36V |
| Terminal Pitch | 2.54mm |
UC3717AN Overview
Tube is used for packaging.Cost savings are achieved by including H bridge in the 16-DIP (0.300, 7.62mm) package.With the 4.75V~5.25V supply voltage, improved reliabilbridge drivery can be achieved.H bridge circuit is put into place in the way of Through Hole.When 0°C~150°C TJ is operating at a certain temperature, motor driver H bridge can function normally.There are a variety of applications for H bridge motor driver, including General Purpose, Stepper Motors.Full bridge also has a number of specific characteristics, including Bootstrap Circuit.Transmission lines are terminated with H bridges whose characteristic impedance matches their characteristic impedance, known as 16 terminations.An interface using 16 pins is used to provide pronged contact.Based on its base H bridge ic number of UC3717, more closely related H bridge ics can be found.A voltage of 36V is used as the supply voltage.When the ambient temperature reaches 1A, the power supply will provide the maximum load current possible.The output and power supply pins are flowing wH-bridgeh current 800mA.A number of 16 pins work together to provide this bridge driver with its specific functions.Under the subcategory of Motion Control Electronics, this H bridge motor driver shares various similarities with other parts.It is calculated that the Hbridge releases 46V volts.An electrical load is supplied with power from 510/40V.Also, H-bridge is capable of providing IT ALSO REQUIRES 10V TO 46V SUPPLY.
UC3717AN Features
Available in 16-DIP (0.300, 7.62mm) Package / Case
Operating Temperature at the range of Through Hole
Interface IC Type : UC3717
With IT ALSO REQUIRES 10V TO 46V SUPPLY Drivers
UC3717AN Applications
There are a lot of Texas Instruments UC3717AN Full Bridge Drivers, Half-Bridge Drivers applications.
- Voltage Regulators
- Desktop Computers
- Voltage Regulators for CPUs
- Industrial Fans
- Notebook Computers
- Compact Blade Servers
- V-Core
- CD players
- DVD players
- Networking Microprocessor Voltage Regulators
