UC3770BNG4
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| JESD-609 Code | e4 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Motion Control Electronics |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Supply Voltage | 36V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.3V |
| Min Supply Voltage | 4.75V |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 33mA |
| Current - Output | 2A |
| Voltage - Output | 45V |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UC3770BNG4 Overview
As a cost-saving measure, H bridge is included in the PDIP package.Transmission lines are terminated with H bridges whose characteristic impedance matches their characteristic impedance, known as 16 terminations.As H bridge ic of the signal interface, 16 pins are used as pronged contacts.To operate H bridge circuit, a voltage supply of 36V is required.The analog IC type of this H bridge is STEPPER MOTOR CONTROLLER.An ambient temperature of 1.5A enables a power supply to provide a maximum load current.This bridge driver functions in part thanks to the 16 pins working together.There is a 1 output on it.This H bridge motor driver falls under the subcategory of Motion Control Electronics.To ensure high efficiency, the operating supply voltage is maintained at 5V.So as to avoid excessive costs, 70°C is considered to be the maximum reasonable operating temperature.Considering the cost implications, the acceptable minimum operating temperature is 0°C.
UC3770BNG4 Features
Available in PDIP Package / Case
Number of Receivers: 5V
Operate supply voltage at 0°C
UC3770BNG4 Applications
There are a lot of Texas Instruments UC3770BNG4 Full Bridge Drivers, Half-Bridge Drivers applications.
- Voltage Regulators
- Industrial Fans
- Non-V-Core
- Voltage Regulators for DDR memory arrays
- Voltage Regulators for GPUs
- Home Appliances
- Bipolar stepper motor
- OA equipments
- Workstations
- DC-DC Converters
