UC3824DWTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CURRENT MODE OPERATION ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Frequency | 1MHz |
| Base Part Number | UC3824 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 13V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.4V~30V |
| Control Features | Current Limit, Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 8.8V |
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 340kHz~460kHz |
| Input Voltage (Max) | 30V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 85 % |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC3824DWTR Overview
With a 16-SOIC (0.295, 7.50mm Width) package, the switching controller is suitable for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC is packaged in a solid enclosure of Tape & Reel (TR). There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 8.4V~30V. Suitable for work in a 0°C~70°C TA dc switcher. There is a switch at 340kHz~460kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Ramp, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at DUAL . Various 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. UC3824 can be searched for other relevant dc to dc converter ics. There are 16 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. Input voltage of dc dc voltage regulator must be 8.8V. As determined by the test statistics, the output voltage of DC regulator is 13V. It should be noted that the dc to dc regulator only accepts 30V voltage as input voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. A duty cycle set at 85 % ensures voltage regulator dc to dc reliability during power-on and power-off. Switching controllers operate at 1MHz frequencies. DC to DC voltage regulator has the value of CURRENT MODE OPERATION ALSO POSSIBLE to better satisfy the requirement. This voltage controller requires a supply voltage of 15V.
UC3824DWTR Features
Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 1MHz
CURRENT MODE OPERATION ALSO POSSIBLE
UC3824DWTR Applications
There are a lot of Texas Instruments UC3824DWTR DC to DC converter applications.
- Terrestrial set-top boxes
- Thermal power
- Special machining machine tools
- Flaw detection equipment
- Window air conditioners
- Computer application technology
- Printing equipment
- Household control circuits
- Alternators
- Precision electronic equipment
