UC3824NG4
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.053808g |
| JESD-609 Code | e4 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CURRENT MODE OPERATION ALSO POSSIBLE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Input Voltage-Nom | 15V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 30V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 200mA |
| Frequency (Max) | 1MHz |
| Voltage - Output | 13V |
| Input Voltage (Min) | 8.8V |
| Topology | Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 85 % |
| Height | 4.57mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UC3824NG4 Overview
This switching controller fits most application requirements since it is packaged in a PDIP package. There is sufficient capacity to generate switching controller for outputs 2. It can switch at 1MHz. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of terminations with 16 of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. In total, switching converter has 16 pins. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 8.8V. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. The switching controller works at a frequency of 1MHz. As a result, DC to DC voltage regulator has a value of CURRENT MODE OPERATION ALSO POSSIBLE so that the need can be met more directly. A temperature 0°C lower than 0°C should be maintained. DC regulator should run at a temperature of 70°C more than 70°C degrees Celsius. Total number of functions (s) for thare switch converters are 1. There is a design for voltage regulators switching with 16 pins. It is possible for the controller to switch at a frequency of 1MHz. A 200mA input switching controller would benefit from it. It outputs a voltage of 13V when working normally. Switching voltage regulators is rated 30V in terms of maximum supply voltage.
UC3824NG4 Features
Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
CURRENT MODE OPERATION ALSO POSSIBLE
UC3824NG4 Applications
There are a lot of Texas Instruments UC3824NG4 DC to DC converter applications.
- Wide-range voltage regulation circuits
- Direct power supply system
- Die casting equipment
- Smart grid
- Printing
- Domestic water pumps
- Computer monitoring equipment of building
- Photovoltaic power
- Hydrogen power
- Network technology
