UC3825DWTRG4

16 Terminals 8.4V~30V 16-Pin UC3825 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 340kHz~460kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UC3825DWTRG4
Package: 16-SOIC (0.295, 7.50mm Width)
Datasheet: -
Stock: 335
Description: 16 Terminals 8.4V~30V 16-Pin UC3825 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 340kHz~460kHz Transistor Driver (Kg)

Details

Tags

Parameters
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	CAN ALSO BE CONFIGURED IN CURRENT MODE
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Frequency	1MHz
Base Part Number	UC3825
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	13V
Output Type	Transistor Driver
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	8.4V~30V
Control Features	Current Limit, Enable, Frequency Control, Ramp, Soft Start
Input Voltage (Min)	8.8V
Topology	Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull
Control Mode	VOLTAGE-MODE
Frequency - Switching	340kHz~460kHz
Input Voltage (Max)	30V
Control Technique	PULSE WIDTH MODULATION
Rise Time	30ns
Synchronous Rectifier	No
Fall Time (Typ)	30 ns
Max Duty Cycle	50 %
Duty Cycle (Max)	85%
Output Phases	1
Width	7.5mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.295, 7.50mm Width)
Surface Mount	YES
Number of Pins	16
Weight	473.692182mg
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Obsolete

UC3825DWTRG4 Overview

The switching controller fits in the 16-SOIC (0.295, 7.50mm Width) package and is ideal for most applications. 2 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 8.4V~30V. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. The switching controller can be switched at 340kHz~460kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Ramp, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 16. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "UC3825". There are only 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. The minimum input voltage of the dc dc voltage regulator should be 8.8V. As determined by the test statistics, the output voltage of DC regulator is 13V. It should be noted that the dc to dc regulator only accepts 30V voltage as input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. A frequency of 1MHz is set for the switching controller. DC to DC voltage regulator has a value of CAN ALSO BE CONFIGURED IN CURRENT MODE to better satisfy the need.

UC3825DWTRG4 Features

Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE