UC3825NG4

16 Terminals 8.4V~30V 16-Pin UC3825 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 340kHz~460kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UC3825NG4
Package: 16-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 642
Description: 16 Terminals 8.4V~30V 16-Pin UC3825 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 340kHz~460kHz Transistor Driver (Kg)

Details

Tags

Parameters
Control Mode	VOLTAGE-MODE
Frequency - Switching	340kHz~460kHz
Input Voltage (Max)	30V
Control Technique	PULSE WIDTH MODULATION
Rise Time	30ns
Supply Current-Max (Isup)	33mA
Synchronous Rectifier	No
Fall Time (Typ)	30 ns
Max Duty Cycle	85 %
Output Phases	1
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	16
Weight	1.053808g
Operating Temperature	0°C~70°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	CAN ALSO BE CONFIGURED IN CURRENT MODE
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Supply Voltage	15V
Frequency	1MHz
Base Part Number	UC3825
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	2
Output Voltage	13V
Output Type	Transistor Driver
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	8.4V~30V
Control Features	Current Limit, Enable, Frequency Control, Ramp, Soft Start
Input Voltage (Min)	8.8V
Topology	Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull

UC3825NG4 Overview

The switching controller fits in the 16-DIP (0.300, 7.62mm) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 2 numbers. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) are supported. 8.4V~30V is the operating voltage and supply voltage of the dc control. Suitable for a 0°C~70°C TA dc switcher. With this switching controller, you can switch at 340kHz~460kHz. The Through Hole makes it ideal for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Ramp, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . The 16 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. You can find other relevant dc to dc converter ics by searching "UC3825". There are only 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. An input voltage of 8.8V is the minimum required for the dc dc voltage regulator. Statistically, the DC regulator outputs 13V voltage. It should be fully noted that the dc to dc regulator only accepts 30V input voltage at most. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. The maximum duty cycle of this voltage regulator dc to dc is set to 85 % to ensure reliability during power-up and power-down. Switching controller operates at 1MHz Hz. The value of DC to DC voltage regulator is set to CAN ALSO BE CONFIGURED IN CURRENT MODE in order to better satisfy the requirement. Voltage 15V is required for supply. There should be 33mA current exceeding 33mA supplied to the controller.

UC3825NG4 Features

Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE