Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Number of Pins |
24 |
Weight |
678.092244mg |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
CAN ALSO WORK IN CURRENT MODE |
Subcategory |
Switching Regulator or Controllers |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Frequency |
450kHz |
Base Part Number |
UC3827 |
Function |
Step-Down, Step-Up/Step-Down |
Number of Outputs |
3 |
Output Voltage |
2.5V |
Output Type |
Transistor Driver |
Input Voltage-Nom |
15V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Output Configuration |
Positive |
Output Current |
100mA |
Voltage - Supply (Vcc/Vdd) |
7.6V~20V |
Control Features |
Frequency Control, Ramp, Soft Start |
Topology |
Buck, Full-Bridge, Push-Pull |
Control Mode |
VOLTAGE-MODE |
Frequency - Switching |
220kHz |
Control Technique |
PULSE WIDTH MODULATION |
Rise Time |
40ns |
Synchronous Rectifier |
Yes |
Fall Time (Typ) |
30 ns |
Nominal Input Voltage |
15V |
Max Duty Cycle |
95 % |
Duty Cycle (Max) |
91% |
Output Phases |
1 |
Height |
2.65mm |
Length |
15.4mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
UC3827DW-1 Overview
Capsuled in the 24-SOIC (0.295, 7.50mm Width) package, the switching controller can be used for a wide range of applications. For 3 outputs, the dc motor controller is appropriate. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. dc control's supply and operating voltages are 7.6V~20V. Qualified to work in an dc switcher with 0°C~70°C TA. The switching controller can be switched at 220kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. The dcdc regulator features Frequency Control, Ramp, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a DUAL terminal on the switching converters. An array of 24 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. You can find other relevant dc to dc converter ics by searching "UC3827". 24 pins are present on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 2.5V voltage based on test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 95 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controllers work at 450kHz Hz. DC to DC voltage regulator has the value of CAN ALSO WORK IN CURRENT MODE to better satisfy the requirement. It is possible to set the input voltage as 15V for nominal working statuses.
UC3827DW-1 Features
Transistor Driver Outputs
Switching Frequency: 220kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 450kHz
CAN ALSO WORK IN CURRENT MODE
UC3827DW-1 Applications
There are a lot of Texas Instruments UC3827DW-1 DC to DC converter applications.
- Computer application technology
- Laboratories
- Communication system
- Balance equipment
- Shearing machines
- Printing equipment
- Computer monitoring equipment of building
- Radio equipment
- Lathes
- Injection molding machinery