UC3842ANG4
| Parameters | |
|---|---|
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Supply Current-Max (Isup) | 25mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 25V |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 96% |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Supply Voltage | 11V |
| Terminal Pitch | 2.54mm |
| Frequency | 450kHz |
| Base Part Number | UC3842 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
UC3842ANG4 Overview
It comes in the 8-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. 1 outputs can be generated with the dc motor controller. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. 10V~30V is the operating voltage and supply voltage of the dc control. Suitable for work in a 0°C~70°C TA dc switcher. With this switching controller, you can switch at Up to 500kHz. dc dc regulator can be generalized using Through Hole. Switching control is made easier with the dcdc regulator's Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of 8 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. You can find other relevant dc to dc converter ics by searching "UC3842". There are only 8 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. According to the test statistics, DC regulator outputs 15V voltage. You should note that the dc dc regulator's usual output current is 200mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. A frequency of 450kHz is set for the switching controller. 25V is the nominal working voltage. The supply voltage should be 11V. It is not recommended to supply more current to the controller than 25mA.
UC3842ANG4 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 450kHz
UC3842ANG4 Applications
There are a lot of Texas Instruments UC3842ANG4 DC to DC converter applications.
- Remotely powered electric motors
- Digital precision reference circuits
- Product testing
- Laboratories
- Wind power
- Analog precision reference circuits
- Surface processing equipment
- Digital display device
- Precision electronic equipment
- Direct power supply system
