UC3842BVD1G
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 52kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | UC384*B |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 13.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 10V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Nominal Input Voltage | 30V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 96 % |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
UC3842BVD1G Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. 1 outputs are supported by the dc motor controller. A solid enclosure of Tube surrounds pmic. A total of Transistor Driver dc switching's outputs can be handled by it. 10V~30V is the operating voltage and supply voltage of the dc control. Qualified to work in an dc switcher with -40°C~105°C TA. There is a switch at Up to 500kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Frequency Control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of 8 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. UC384*B can be searched for other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 13.5V voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 96 % during power-up and power-down. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controllers work at 52kHz Hz. A nominal working status is achieved when the input voltage is set to 30V.
UC3842BVD1G Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 52kHz
UC3842BVD1G Applications
There are a lot of ON Semiconductor UC3842BVD1G DC to DC converter applications.
- Thermal power
- Computer application technology
- Correction machines
- Series voltage regulation circuits
- Automatic testing equipment
- Imported equipment
- Automatic plug-in machines
- Power supplies of electronic gadgets
- Electric heating, lighting
- Program control systems
