UC3843BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | UC384*B |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Max Supply Current | 17mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 96 % |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC3843BDR2G Overview
With its 14-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's7.6V~30V is the supply voltage and the operating voltage of the dc control. Suitable for a 0°C~70°C TA dc switcher. A switching controller such as this can switch at a value of Up to 500kHz . dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. 14 terminations with a variety of function. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "UC384*B". 14 pins are on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. Statistically, DC regulator outputs 5V volts. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. A duty cycle set at 96 % ensures voltage regulator dc to dc reliability during power-on and power-off. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. The switching controller works at a frequency of 500kHz. Continually operating at more than 17mA may cause malfunctions and damage to the component.
UC3843BDR2G Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 500kHz
UC3843BDR2G Applications
There are a lot of ON Semiconductor UC3843BDR2G DC to DC converter applications.
- SMT equipment
- Printing
- Large fire protection systems
- Grinders
- PSRR circuits
- Injection molding machinery
- Plate bending machines
- Production lines
- Communication system
- Wide-range voltage regulation circuits
