UC3844BD1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Frequency | 275kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UC384*B |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 10V~36V |
| Quiescent Current | 12mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 48 % |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
UC3844BD1 Overview
The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC is packaged in a solid enclosure of Tube. A total of Transistor Driver dc switching's outputs can be handled by it. dc control's supply and operating voltages are 10V~36V. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. This switching controller can switch at Up to 500kHz. The Surface Mount makes it ideal for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Terminal (s) of the switching converters are designed at the DUAL position. Various 8 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 15V. Other relevant dc to dc converter ics can be found by searching "UC384*B". The switching converter has a total of 8 pins. Switching converter is a special type of Switching Regulator or Controllers. DC regulator outputs 5.1V voltage according to the test statistics. This dc to dc regulator accepts only 25V input voltage at most. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 48 % during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Switching controller operates at 275kHz Hz. DC switching uses 12mA when it is dormant.
UC3844BD1 Features
Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
Frequency: 275kHz
UC3844BD1 Applications
There are a lot of ON Semiconductor UC3844BD1 DC to DC converter applications.
- Medical equipment
- Surge protection circuits
- Grinders
- Handheld GPS
- Emergency lighting monitoring equipment
- Ball screw pair
- Precision electronic equipment
- Electrical power transmission
- Scientific testing
- Direct power supply system
