UC3845BD1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Frequency | 275kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UC384*B |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Quiescent Current | 12mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 48 % |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UC3845BD1 Overview
The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. 1 outputs can be generated with the dc motor controller. A solid enclosure of Tube surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 7.6V~30V voltage are supplied and operated. Suitable for a 0°C~70°C TA dc switcher. This switching controller can switch at 500kHz. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. switching converters terminal (s) are designed to be at DUAL. An array of 8 terminations of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. You can find other relevant dc to dc converter ics by searching "UC384*B". In total, switching converter has 8 pins. Switching converter type is specifically Switching Regulator or Controllers. DC regulator outputs 5.1V voltage based on test statistics. The dc to dc regulator can only accept a maximum input voltage of 25V. If you start a project, note down the dc dc regulator's usual output current of 1A. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 48 %. Switching controller operates at 275kHz Hz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 30V. During dormancy, the dc switching uses 12mA.
UC3845BD1 Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
Frequency: 275kHz
UC3845BD1 Applications
There are a lot of ON Semiconductor UC3845BD1 DC to DC converter applications.
- Product testing
- Computer application technology
- Printing
- Computer-related products
- Grinders
- Lathes
- Geothermal power
- Adjustable voltage or current linear circuits
- Window air conditioners
- SMT equipment
