UC3845BD1R2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UC384*B |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.1V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative, Isolation Capable |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~30V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 50 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 275kHz |
| Max Duty Cycle | 48 % |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UC3845BD1R2 Overview
In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. 1 outputs are supported by the dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at 7.6V~30V volts and has 7.6V~30V supply voltage. Suitable for work in a 0°C~70°C TA dc switcher. The switching controller can be switched at 500kHz. dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . A variety of 8 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. Search for "UC384*B" to find other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. Statistically, DC regulator outputs 5.1V volts. The dc to dc regulator can only accept 25V input voltage. It's important to remember that the dc dc regulator's normaloutput current is 1A, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 48 %. There is a maximum frequency of 275kHz on this dc regulators. To operate the voltage regulator dc to dc safely and reliably, users should apply 30V.
UC3845BD1R2 Features
Transistor Driver Outputs
Switching Frequency: 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 48 %
UC3845BD1R2 Applications
There are a lot of ON Semiconductor UC3845BD1R2 DC to DC converter applications.
- Combined machine tools
- Energy management systems
- Imported equipment
- Product testing
- Ball screw pair
- Current source circuits
- Flaw detection equipment
- Milling machines
- Radio equipment
- Hydrogen power
